Zodiac NZO 600 Eignerhandbuch Seite 72

BUOYANCY CHAMBER – Inflation system
INFLATING THE BUOYANCY CHAMBER
Attach the hose connector to the inflator inflation port.
To inflate your boat properly, the inflator should be correctly placed on the ground.
The boat inflates rapidly if the inflator is used smoothly and without haste.
WARNING
INFLATING THE BUOYANCY CHAMBER
• Place the adapter corresponding to the diameter of the semi built-in valve at the inflator
hose nozzle.
Inflate the buoyancy mechanism,
until the partitions (a) are no longer visible (pressure = 240 mb)
Never put a compartment
under pressure while the
others are still fully
Inflating is complete: Screw on the inflating valve caps.
NOTE:
Activate all valves in the inflation position.
DO NOT USE A COMPRESSOR OR COMPRESSED AIR CYLINDER.
BUOYANCY CHAMBER - Pressure
balancing the pressure between the different compartments
deflated
1
2
A slight loss of air is normal before the cap is screwed on.
Only the caps guarantee final air tightness.
Page 18/ 52
a