Ii-2-Fixing The Protective Flap - Zodiac PRO 750 Eignerhandbuch

BUOYANCY CHAMBER – Installing the buoyancy
3
- Repeat for the other side of the buoyancy chamber.
- Bring forward the buoyancy chamber's nose in order to pull the exterior protective flap under
the hull's nose.
- Pull the buoyancy chamber's two tabs again as far as they will stretch towards the stern of the
boat while trying to centre the nose in relation to the forward section of the hull.
- Slightly inflate the nose of the buoyancy chamber in order to check that it is well centred and
perfectly hugs the hull. Restart the process if the buoyancy chamber is not correctly positioned.
BUOYANCY CHAMBER – Fixing the protective flap

II-2-FIXING THE PROTECTIVE FLAP

4
Fix the external flap using the stainless steel bars and bolts of the buoyancy chamber kit.
Apply sealing compound on all the screws and in the hull holes to achieve final tightness.
chamber on the hull
11
E
N
G
L
I
S
H