Setting Up The Torch; Risk Of Injury - LORCH ML 1500 Betriebsanleitung

6 Putting into operation

6.2 Setting up the torch

ML 1500
ML 2400
ML 2500
ML 3600
ML 3800
ML 4500
MW GRIP 5300
MW GRIP 5400
MW GRIP 5500
MW GRIP 5800
1 Gas nozzle
2 Gas diffuser
3 Contact tip
Fig. 2 Setting up the torch
EN - 12
CAUTION

Risk of injury

Puncture or cut-in wounds may be caused by the wire electrode.
• Do not reach into the danger zone.
• Wear protective gloves.
Set up the torch neck according to the following figure:
1
2
4 Tip adaptor
5 Gas diffuser
MIG/MAG welding torches ML/MW GRIP
4
3
6 Torch neck
(Schematic diagram)
5 6