Inhaltsverzeichnis
Werbung
GB
METAL CUT OFF SAW
The numbers in the following text refer to the
drawing on page 2 - 3.
Read this operators guide carefully,
before using the machine. Ensure that
you know how the machine works, and
how it should be operated. Maintain the
machine in accordance with the
instructions, and make certain that the
machine functions correctly. Keep this
operator's guide and other enclosed
documentation with the machine.
This saw is for cutting steel and
concrete/brick sections. Use fibre
reinforced cutting discs only.
Do not fit a saw blade to this saw. Do
not use on wood or wood derived
material.
Contents
1. Machine data
2. Safety instructions
3. Before using the cut off saw
4. Using the metal cut off saw
5. Maintenance
1. MACHINE DATA
Technical specifications
Voltage
230 V~
Frequency
50 Hz
Power input
2000 W
No load speed
3800/min
Saw blade dimensions
∅355 x 3.2 x
∅25.4 mm
Max. cuttingcapacity
∅90 mm
Weight
16.3 kg
Lpa (sound pressure)
95.7 dB(A)
Lwa (acoustic power)
108.7 dB(A)
Vibration
2.3 m/s
2
Productinformation
1. ON/OFF Trigger
2. Handle grip
3. Lock butten
4. Hook pin for safety chain
5. Lock pin
04
6. Hook
7. Upper cover
8. Cutting disc
9. Lower protection cover
10.Connection dust extractor
11. Work piece clamp
12.Quick adjusting feature
13.Fence angle
14.Spring
15.Screw cutting depth
16.Cover carbon brush
2. SAFETY INSTRUCTIONS
The following symbols are used in these
instructions for use:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Wear ear and eye protection
Wear protective gloves
Special safety instructions
1. Get to know your electrical equipment.
Find out not only about the possibilities and
limitations of your equipment but also about
the specific dangers which can arise from
working with it.
2. Ensure that the equipment is properly
connected to the protective conductor.
3. Choose your working environment carefully.
Do not expose your electrical equipment to
rain and do not use in wet or damp areas. Do
not use in the proximity of inflammable liquids
and gases. Remove objects such as waste or
other materials which are easily flammable.
4. Keep the work place clean and tidy.
Always work in well-lit conditions. Untidy and
dark working conditions can cause accidents.
5. Wear appropriate working clothes.
Do not wear loose clothing or jewellery which
could get caught in the machinery. When
working outdoors, wear rubber gloves and
non-slip shoes.
Ferm
Ferm
DK
81
Werbung
Inhaltsverzeichnis
