Herunterladen Inhalt Inhalt Diese Seite drucken

Machine Data; Safety Instructions - Ferm FCT-360L Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

GB
COMBITOOL
The numbers in the following text correspond
with the pictures at page 2 - 3.
Warning! Always read the
instructions for electrical products
carefully befor use. It will help you
understand your product more easily
and avoid unnecessary risks. Keep
this instruction manual in a safe
place for future use.
Intended use
This appliance is developed for DIY-use and can
be used e.g. for drilling small holes in wood or
synthetic materials, engraving of glass, grinding
of bolts, polishing smooth surfaces etc.
Contents

1. Machine data

2. Safety instructions

3. Assembly and operation
4. Accessories for Combitool
5. Maintenance
1. MACHINE DATA
Technical specifications
Charger input
230 V~, 50 Hz
Charger output
4.1 V
Battery capacity
2.4 Ah
No load speed
5000-28000/min
Capacity of spring chuck
3.2 + 2.4 mm
Weight
0.32 kg
Package contents
The package contains:
1 Combitool
27 Accessories
1 Case
1 Users manual
1 Safety instructions
1 Warranty card
Check the machine, loose parts and accessories
for transport damage.
04
Features
Fig. 1
1. Collet ring
2. Ring
3. LED
4. Spindle lock
5. On/Off switch
6. Speed adjusting buttons
7. Speed indicator
8. Charger
9. Charger status indicators
2. SAFETY INSTRUCTIONS
The following pictograms are used in these
instructions for use:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
The number of revolution of the
machine can be electronically set.
Always use ear protection.
Wear eye protection.
Do not expose to rain.
Indoor use only
In case of failure, the transformer is not
dangerous
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Special safety instructions
Compare the maximum number of revolutions
allowed of the accessories with the number of
revolutions of the machine.
When you put the machine away the engine
must be switched off and moving parts must
have reached a standstill.
Ferm
Ferm
DK
49

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis