Inhaltsverzeichnis
Werbung
DK
Ventilationsrillerne skal holdes fri for støv og
snavs. Hvis snavset ikke vil gå af, bruges en blød
klud vredet op i sæbevand. Der må ikke bruges
opløsningsmidler som f.eks. benzin, sprit,
salmiakspiritus o.l. Sådanne opløsningsmidler
kan beskadige dele af plastic.
Smøring
Maskinen skal ikke smøres.
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en
enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual
finder du en tegning med alle dele, der kan
bestilles.
Miljø
For at undgå transportbeskadigelse leveres
maskinen i en solid emballage. Emballagen er så
vidt muligt lavet af genbrugsmateriale. Genbrug
derfor emballagen.
Defekte og/eller kasserede elektriske
eller elektroniske maskiner skal
afleveres på en genbrugsplads.
Garanti
Læs det separat vedlagte garantikort for
garantibetingelserne.
80
Keep hands and gloves away from moving
parts.
6. Wear protective gear.
All persons present in the operating area must
wear safety gloves and glasses in compliance
with local safety standards. When operating
the machinery for extended periods, always
use ear protectors. Wear a mask if the work
causes dust to be created. Protective helmets,
masks and shoes must be worn when
necessary and safety regulations require it.
Always keep a fire extinguisher close by.
7. Do not allow anyone to stand close to the
equipment.
Children and other bystanders must be kept
at a distance to prevent the operator from
being distracted and the mains lead from
being pulled accidentally.
8. Protect others in the work area from waste,
splinters and sparks.
When necessary, put barriers and safety
guards in place.
9. Keep machine and workpiece steady.
Always use clamps, chuck blocks and other
practical working aids, so that your hands are
free and can hold and control the machine
more efficiently.
10.Use the right equipment and accessories. Do
not use equipment which is inappropriate for
the material, such as for example a circular
saw for sawing logs or tree trunks. Do not
modify electrical equipment.
11. Always use the recommended accessories,
which must be in perfect condition.
The use of any non-recommended
accessories can cause unnecessary risks.
Ensure that accessories have been installed
correctly, and get then inspected regularly.
Always take care not to damage safety
devices and equipment when installing
accessories.
12.Inspect damaged equipment parts.
Before starting up the machine, inspect
covers and safety devices. Check for
incorrectly aligned parts, jammed moving
parts, incorrect mounting, damaged parts and
other defects which could prevent the
machine from operating correctly. Switch off
immediately if excessive noise or vibration
occur. Do not continue until the problem has
been resolved. Never use damaged
equipment. Until the machine has been fully
repaired, place a 'DO NOT USE' sign on it.
Ferm
Ferm
Covers and other damaged parts must be
fully repaired. Insist on genuine spare parts
from the original manufacturer.
13.Remove all keys and adjusting tools.
Make a habit of inspecting and removing all
keys and adjusting tools before switching on
the machine.
14.In order to prevent electric shock:
avoid bodily contact with earthed surfaces
(such as pipes, cooling systems). When
carrying out blind cutting work, always ensure
that you do not damage any hidden cables or
pipes.
15.Avoid unintentionally or incorrectly starting up
the machine.
Ensure that the machine is switched off before
turning on mains power. If the on/off button is
defective, do not use the machine. When
carrying the machine whilst plugged in, be
careful not to accidentally switch it on.
16.Do not use undue force when operating the
machine.
The machine will operate more effectively if
you use it in accordance with the operating
instructions. Excessive force puts strain on it,
causes wear and tear and can cause you to
lose control of the machine.
17.Keep hands away from all sharp edges, cut
edges and moving parts.
18.Avoid damaging mains leads.
Never carry the machine by its mains lead or
pull out the plug by pulling on the mains lead.
Pull on the plug itself to prevent damage
occurring. Protect the mains lead from heat, oil,
sharp objects and edges, and moving parts.
19.Ensure that you maintain the correct distance
from the machine.
Keep control of the machine. Ensure that you
have a firm foothold and that your body is
steady. During operations, hold the machine
firmly and take special care when working on
ladders, roofs, scaffolding etc.
20.Work carefully.
Always pay attention to what you are doing,
use your common sense and never use the
machine if you are tired, or under the
influence of drugs, alcohol, medicines or other
substances which could affect your
concentration.
21.Always pull the plug out.
When the machine is not in use, before
starting up, and when changing parts such as
the disc, other machine parts, and saws,
always disconnect from the mains.
GB
05
Werbung
Inhaltsverzeichnis
