Technical Specifications; Product Information; Safety Instructions - Ferm KS-160 Gebrauchsanweisung

REF.NR. DESCRIPTION
5 BASE PLATE
5 BASE PLATE
8/9/10 CARBON BRUSH (SET)
11 CARBON BRUSH CAP
16 STATOR
22 AUXILIARY HANDLE
24 SWITCH
27 ROTOR
37 GEAR
38 FLANGE (OUTSIDE)
42 SPLITTER
43 SPRING
44 SAW BLADE PROTECTION COVER
45 HARD METAL SAW BLADE Ø 160 mm
46 FLANGE (INSIDE)
47 LEFT BOLT FOR SAW BLADE
50 SOCKET SPANNER
55 PARALLEL GUIDE
61 GUIDE PLATE
66
SPARE PARTS
English
UK
FERM NR.
406763
406763 Circular saw
700000
THE NUMBERS IN THE FOLLOWING TEXT COR-
RESPOND WITH THE PICTURES AT PAGE 2.
700001
700002 The pictures mentioned in the text correspond with
the pictures at page 2.
700003
700004

TECHNICAL SPECIFICATIONS

700005
700006
Voltage
700007 Frequency
Power input
700008
No load speed
700015
Saw blade dimensions
Number of teeths
700009
Weight
310310
Lpa (sound pressure level)
700010
Lwa (sound power level)
aw(vibration value)
700011
700012
700013

PRODUCT INFORMATION

700014
Fig. A.
1. Handle
2. Spindle lock
3. On/off switch
4. Depth of cut adjusting knob
5. Mains lead
6. Riving knife
7. Blade guard
8. Hexagonal bolt
9. Shoe
10. Flange
11. Saw Blade
12. Parallel stop
13. Parallel guide adjusting knob
14. Cutting angle adjustingknob
PACKAGE CONTENTS
Circular saw
Box wrench 13 mm
Saw blade Ø 160 mm
Parallel stop
Check first whether or not the delivery has been damaged
by transport and/or whether all the parts are present.

SAFETY INSTRUCTIONS

The following pictograms are used in these instructions
for use:
Ferm Ferm
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
| 230 V~ Electrical safety
| 50 Hz When using electric machines always observe the
| 1050 W safety regulations applicable in your country to
| 4000/min. reduce the risk of fire, electric shock and personal
| 160x1.8x20 mm injury. Read the following safety instructions and
| Z18 also the enclosed safety instructions.
| 4 kg Keep these instructions in a safe place!
| 100.2 dB(A)
Always check that the power supply corre-
| 113.3 dB(A)
| 32.4 m/s 2 sponds to the voltage on the rating plate.
The machine is double insulated in accordance
with EN50144; therefore no earth wire is requi-
red.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size
is 1.5 mm 2 . When using a cable reel always unwind the
reel completely.
BEFORE USING THE CIRCULAR SAW:
1. Check the following points:
- do the voltage of the motor correspond to the
mains voltage (appliances for a mains voltage of
230 V
- are the mains lead and the mains plug in a good
condition: solid, without any loose ends or
damage;
- if the saw blade is missing any teeth, or if it shows
any cracks, it must be replaced immediately.
- Make sure the blade is secure.
- Use this circular saw to saw only wood, wood-like
products.
2. Do not use circular saw blades wich are deformed or
damaged.
3. Do not use HSS blades.
4. Only use blades meeting the required dimensions, as
well as data and descriptions;
3