Inhaltsverzeichnis
Werbung
STEERING AND FRONT SUSPENSION
1
a
b
b
EC563000
REMOVAL POINTS
EC563202
Ring nut
1. Remove:
2
Support the steering shaft so that it may
not fall down.
Bearing race
1. Remove:
2. Remove:
Take care not to damage the steering shaft
thread.
ASSEMBLY AND INSTALLATION
1. Install:
NOTE:
When installing an inner tube assembly in the
lower bracket, align the projection a on the
a
inner tube assembly with the indentation b in
the lower bracket.
5 - 15
• Lower ring nut 1
Use the steering nut wrench 2.
Steering nut wrench:
YU-33975/90890-01403
WARNING
• Bearing race 1
Remove the bearing race using long rod
2 and the hammer.
• Bearing race 1
Use the floor chisel 2.
CAUTION:
• Front fork assembly
CHAS
Werbung
Inhaltsverzeichnis
