Inhaltsverzeichnis
Werbung
FRONT WHEEL AND REAR WHEEL
1
1
4
3
2
b
a
Rear wheel
1. Install:
• Wheel bearing 1
• Spacer 2
• Wheel bearing 3
• Oil seal 4
NOTE:
• Apply the lithium soap base grease on the oil
seal lip when installing.
• Install the wheel bearing with seal facing out-
ward.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Right side of bearing shall be installed first.
• Install the oil seal with its manufacture's
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Rear wheel sprocket 1
• Bolts (rear wheel sprocket) 2
• Nuts (rear wheel sprocket) 3
2
3
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
3. Install:
• Rear wheel
NOTE:
Make sure that the slot a on the brake shoe
plate with the stopper b on the swingarm.
5 - 8
CHAS
New
25 Nm (2.5 m · kg, 18 ft · lb)
Werbung
Inhaltsverzeichnis
