Inhaltsverzeichnis
Werbung
VALVE CLEARANCE ADJUSTMENT/
SPARK ARRESTER CLEANING (For USA)
1
2
6. Install:
• Spark plug
• Spark plug cap
• Timing plug
• Crankshaft end cover
NOTE:
Apply the engine oil on the O-ring.
SPARK ARRESTER CLEANING (For USA)
WARNING
• Be sure the exhaust pipe and muffler are
cool before cleaning the spark arrester.
• Do not start the engine when cleaning the
exhaust system.
1. Remove:
• Bolts (spark arrester) 1
2. Remove:
• Spark arrester 2
Pull the spark arrester out of the muffler.
3. Clean:
• Spark arrester
Tap the spark arrester lightly, then use a
wire brush to remove any carbon depos-
its.
4. Install:
• Spark arrester
Insert the spark arrester into the muffler
and align the bolt holes.
• Bolts (spark arrester)
3 - 13
INSP
ADJ
13 Nm (1.3 m · kg, 9.4 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
Werbung
Inhaltsverzeichnis
