Inhaltsverzeichnis
Werbung
ENGINE OIL LEVEL INSPECTION
10
30
50
70
0
90 110 130
È
-20 -10
10
0
20
30
40
4. Check:
NOTE:
• Wait a few minutes until the oil settles before
inspecting the oil level.
• When inspecting the oil level, do not screw
the dipstick into the oil tank. Insert the gauge
lightly.
˚F
(For USA and CDN)
É
50
˚C
CAUTION:
• Do not add any chemical additives.
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
• Do not allow foreign material to enter the
crankcase.
(Except for USA and CDN)
CAUTION:
• Do not add any chemical additives or use
a
oils with a grade of CD a or higher.
• Do not use oils labeled "ENERGY CON-
SERVING II" b or higher. Engine oil also
lubricates the clutch and additives could
b
cause clutch slippage.
• Do not allow foreign materials to enter the
crankcase.
3 - 8
• Oil level
Oil level should be between maximum a
and minimum b marks.
Oil level is low → Add oil to proper level.
Recommended oil:
At –10 °C (14 °F) or higher È:
Yamalube 4 (10W-30) or SAE
10W-30 type SE/SF/SG motor
oil
At 5 °C (41 °F) or higher É:
Yamalube 4 (20W-40) or SAE
20W-40 type SE/SF/SG motor
oil
Recommended oil:
Refer to the following chart for
selection of oils which are suited
to the atmospheric temperatures.
Recommended engine oil classifi-
cation:
API STANDARD:
API "SE/SF/SG" or higher grade
(Designed primarily for
motorcycles)
INSP
ADJ
Werbung
Inhaltsverzeichnis
