Inhaltsverzeichnis
Werbung
FRONT WHEEL AND REAR WHEEL
b
a
1
1
2
a
Front wheel
1. Install:
• Wheel bearing 1
• Spacer 2
• Wheel bearing 3
• Oil seal 4
NOTE:
• Apply the lithium soap base grease on the oil
seal lip when installing.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Left side of wheel bearing shall be installed
first.
• Install the oil seal with its manufacture's
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Front wheel
NOTE:
Make sure that the slot a on the brake shoe
plate with the stopper b on the front fork inner
tube.
3. Install:
• Spring 1
• Pin 2
NOTE:
Install the spring 1 with its smaller diameter
end a towards the pin 2.
2
5 - 7
CHAS
New
Werbung
Inhaltsverzeichnis
