Inhaltsverzeichnis
Werbung
ELECTRIC STARTING SYSTEM
5. Measure:
• Brush length a
6. Measure:
• Brush spring force
ASSEMBLY
1. Install:
• Brush holder
2. Install:
• Armature coil 1
3. Install:
• Ring 1
• Starter motor yoke 2
• Front bracket 3
NOTE:
• Apply molybdenum disulfide grease lightly
on to the bearings of the starter motor.
• Align the match mark on the armature
assembly with the match mark on the front
bracket.
6 - 13
ELEC
Out of specification → Replace.
Brush length wear limit:
3.5 mm (0.14 in)
Fatigue/out of specification → Replace as
a set.
Brush spring force:
3.92 ~ 5.88 N
(400 ~ 600 g, 14.1 ~ 21.2 oz)
–
+
Werbung
Inhaltsverzeichnis
