Switching On The Vehicle; Attaching And Securing The Body - Reely Speedy Bedienungsanleitung

e) Switching on the vehicle
• Release the throttle/brake lever on the transmitter so
that it is in the middle position. Release the steering
wheel.
• If you have not already done so, switch on the transmit-
ter using the on/off switch; the green power LED will
light up, and the red "pairing" LED will flash.
• Briefly pressing the button on the speed controller (see
arrow in the right picture) turns on the vehicle.
• The red "pairing" LED on the transmitter will now glow
steadily, and some blue LEDs will go on.
• The vehicle is now ready to ride.
If the red LED flashes slowly, the transmitter batteries are empty and must be replaced with new ones.
f) Attaching and securing the body
Now put the body on the brackets and fasten it with the locking clips that were removed at the start.
34