Switching On The Vehicle; Attaching And Securing The Body - Reely GX3 Bedienungsanleitung

e) Switching on the vehicle
• Release the throttle/brake lever (7) on the transmitter so that it is in the middle position. Release the steering wheel
(8).
• If you have not already done so, switch on the transmitter using the on/off switch (6); the red "pairing" LED (4) on
the transmitter flashes quickly.
• Switch on the vehicle using the on/off switch (see "A" in
the figure on the right) (switch position "ON" = switched
on).
• The red "pairing" LED on the transmitter must now glow
steadily; the vehicle is ready for operation.
If the red LED flashes slowly, the transmitter
batteries are empty and must be replaced with
new ones.
f) Attaching and securing the body
Now put the body on the brackets and fasten it with the locking clips that were removed at the start.
33