Fitting And Using Accessories; Kneading Hook, Whisk And Beater - Silvercrest SKM 550 B3 Bedienungsanleitung

Position
5

9. Fitting and using accessories

9.1 Kneading hook, whisk and beater

WARNING! RISK OF INJURY!
Never place your hands or fingers in the mixing bowl 7 during opera-
►
tion! Risk of injury due to rotating parts!
Change the accessories only when the drive z is at a complete stand-
►
still! After you switch it off, the drive z will run on for a short time.
In cases of malfunction, switch the appliance off and remove the plug
►
from the wall socket. This will prevent the appliance from becoming
switched on again unintentionally.
NOTE
The appliance may only be used if the unused drive openings are se-
►
cured with the drive protection covers.
Proceed as follows to prepare the appliance for operation using the knead-
ing hook 1, whisk 2 and beater 3:
1)
2)
SKM 550 B3
Accessory
Press down the release button o and
move the swivel arm t up into operating
position 2.
Insert the mixing bowl 7.
Check that the base of the mixing bowl 7
is fitted into the recesses u on the appli-
ance.
Function
Operating position of the
blender 5.
GB │ IE │
11 ■