Espressions Smart Pressure Cooker Bedienungsanleitung Seite 47

2. Connect the power cord. The display lights
up and the Smart Pressure Cooker is now in
stand-by mode.
3. Select one of the pressure cooking
programmes: Soup/Broth, Meat/Stew,
Bean/Chili, Poultry, Rice/Risotto, Pasta,
Cake, Multigrains, Sterilize, Steam/Self Clean
or Manual.
4. Personalise the high-pressure programme
by adjusting the time for the desired use and
the ingredients used. You do this by pressing
the Cook Time button, followed by - or +.
5. If required, use the delay-start function for
one of the high-pressure functions to delay
the start. With the delay-start function the
timer counts down before the programme
starts. This is done by pressing the Delay
Start button followed by - or +. After
pressing the button once you can adjust the
hours, after pressing it twice you can adjust
the minutes.
6. After adjusting the settings, press the Start/
Cancel button. The appliance emits 3 beeps
and starts preheating or the timer starts
running. Depending on the quantity of
ingredients and the starting temperature
of the food, the preheating cycle can take
from a few minutes to 40 minutes or even
longer. As soon as the temperature rises and
pressure builds up, the pressure relief valve
will lift.
7. When the correct pressure is reached, the
Smart Pressure Cooker will switch to the
cooking cycle and display the remaining
cooking time in minutes. Please note that
the Smart Pressure Cooker may emit
pulsating steam in between cooking cycles.
Therefore, always stay away from the top
of the unit when it is in use or when it has
completed its programme and has not yet
cooled down or released its pressure.
8. At the end of the programme, the appliance
will automatically release all the pressure
from the steam valve in the Pasta, Rice/
Risotto and Cake programmes. This prevents
dishes from overcooking. For the other
programmes, it is necessary to press the
'Pressure Release' button yourself in order
to release the pressure or let the cooker cool
down completely.
9. As soon as the cooking cycle has finished,
the appliance switches to 'keep warm' mode
if this function has been set in the selected
programme. The display then shows the
elapsed time, e.g. 00:02. This warm-up
mode remains activated for 10 hours. After
this time, the appliance switches off.
10.Now press the Start/Cancel button. The unit
is now in stand-by mode. Make sure that
the pressure relief valve is down before
you open the high pressure lid, otherwise
follow step 7 again and manually release the
pressure if necessary. Now open the lid.
* Pressure can be released in one of the
following ways:
•
Automatic: The pressure is released
automatically to prevent food from boiling
over. In the Rice/Risotto, Pasta and Cake
settings, steam is released automatically as
soon as the cooking time is up.
•
Manual (fast): Press the Pressure Release
button for 3 seconds until it beeps. The
pressure will then be released completely.
DO NOT use this option if there is a large
amount of liquid in the inner pot.
•
Manual (pulsing): Press the Pressure Release
button briefly repeatedly and steam will be
released pulsing.
•
Cooling down: Allow the pot and contents
to cool down naturally until the pressure
release valve drops after completing a
manual program or when the Pressure
Release button is not used. Cooling down
can take 10 to 40 minutes or longer,
depending on the contents of the inner pan.
This is not recommended, as it will lengthen
the whole programme and may overcook
some dishes.
Tip: Users can switch the 'Keep Warm' mode
on/off for programmes where this mode
can be activated even during the cooking
programme. The duration can also be changed
during the cooking programme.
47