Screensaver - BWT AQA perla XL Einbau- Und Bedienungsanleitung

Unit set-up - customer
Regeneration time
Audible alarm
High-flow
AQA Stop
Sensor
Rinse / Hygiene
AQA Watch
Filter

Screensaver

AQA Stop trigger volume
High-flow operation
Function cannot be set
No
AQA Stop
No
Yes
Floor sensor for detecting moisture in conjunction
No
with water volume monitoring.
No
Yes
No
AQA Stop trigger volume
Yes
9999 l
Configurable water volume which, once reached,
will trigger the water supply to be shut off.
Sensor
Function cannot be set
Rinse / Hygiene
R: The rinse function is an additional soft
water rinse, which is recommended for
operation with dwownstream reverse
osmosis, steam generator etc.
H: A sanitizing flushing of both exchanger
columns after 24 h with no water flow
R+H: Both functions active
AQA Watch
The AQA Watch function monitors the building's
water supply system for consistently low
(< 60l /h) flow rates (consistently low flow rates
indicate a problem in the pipeline network).
The control unit issues a warning if an error occurs.
The CIC contact opens in the event of an error or a
power failure. (Max. contact assignment: DC 24 V,
0.5 A.)
Filter
A reminder to change or backflush the filter element
every 6 months, filter type Backwash, E1 or Change
can be selected
Screensaver
Appears after 15 minutes of inactivity
Switch on/off
EN
77
77