52 8.7 Fine Adjusting Outlet Water Hardness - BWT AQA perla XL Einbau- Und Bedienungsanleitung

EN
10:10:37
245 l
Hardness
IN: 22 °d
OUT: 6 °d
Hardness
IN: 22 °d
Motor blending
OUT:
74
10
121 l
6 °d
OK
8.7 Fine adjusting outlet water hard-
ness
Fully open the tap at the nearest cold water tap point
and use the AQUATEST hardness tester to test the
outlet water hardness.
If the value measured differs from the set value
(OUT), you can finely adjust the settings.
Press the water droplet
Press the manual operation button
Motor blending appears
The wheel turns when motor blending is running.
Press the up arrow to increase water hardness.
Press the down arrow to reduce water hardness.