Elica NIKOLATESLA FIT Montage- Und Gebrauchsanweisungen Seite 25

indicator")
Reset filter saturation
After performing maintenance on the filters (greases and/or
carbon/ceramic), press and hold "
" "(13) turns off, restarting the indicator count.
Activation filter saturation indicator
This indicator is normally deactivated.
To activate it, proceed as follows:
- turn on the extractor hob via
- with the extraction motor and cooking zones off, press the
Selection zone (12)
- long press " " (11) until the letters "F" – "G"
appear alternately flashing in the Display (12)
F = carbon/ceramic odour filters
G = grease filter
Carbon/ceramic odour filters

press on the Display (12) when the letter "F" appears

press " " (13) – flashing light

long press "
activation of the carbon/ceramic odour filter indicator
Grease filter

press on the Display (12) when the letter "G" appears

press " " (13) – fixed light

long press "
of the grease filter indicator
" (13) ;
;
" (11) again to confirm the
" (11) again to confirm activation
25