Adding Laundry; Cancelling The Course Of The Cycle . En; Cycle End - hanseatic HTW610D Gebrauchsanleitung

Page EN-20 Operation: Standard cycles

Adding laundry

CAUTION!
Risk of scalding!
Improper handling of the appliance
can lead to scalding caused by hot suds.
■ Never force the appliance lid or the
washing drum open.
1. Press the button (9) until the
symbol disappears (at least 3 seconds).
The appliance lid is unlocked. The drum
has come to a stop.
2. Open the appliance lid and the washing
drum.
3. Place the laundry items inside.
4. Close the washing drum and the appli-
ance lid.
5. Press the button (9) to continue the
course of the cycle.
Cancelling the course of the
cycle
1. To cancel a cycle that is in progress,
switch the appliance off using the
ton (8).
The course of the cycle ends, and the wash
water is drained. When the
appears, you can remove the laundry.

Cycle end

The appliance stops automatically as soon as
the selected cycle is finished. The
goes out.
1. Open the appliance lid (14) and the wash-
ing drum (16) and remove the laundry.
2. Leave the appliance lid (14) and washing
drum (16) open so that the appliance can
dry inside.
3. To switch off the appliance, press the
button (8).
LED (6)
If no further setting is made, the appliance
will automatically switch off after 15 min-
utes.
4. Turn the tap off.
5. Disconnect the mains plug from the socket.
but-
symbol dis-
symbol