hanseatic HTW610D Gebrauchsanleitung Seite 78

Page EN-36 Troubleshooting table
Problem
Transport safety device(s) was
not/were not removed.
Appliance is
Appliance was not installed or
unsteady or
aligned properly.
vibrating strongly.
The laundry in the drum is
heavy or distributed unevenly.
The imbalance correction
Spin cycle is not
system for imbalanced drum
running or is slow.
loads is running.
The appliance lid
This is not an error. The opening mechanism contains a safety catch that
cannot be opened
keeps the appliance lid closed for approx. 2 minutes after the end of the
after the end of the
course of the cycle.
course of the cycle.
Malfunction
Possible causes Solutions, tips
Remove transport safety device(s) (see
"Removing the transport safety devices"
on page EN-30).
Install or align appliance properly (see
"Installation site" on page EN-30).
Stop washing and restart to distribute
the laundry more evenly (see "Adding
laundry" on page EN-20).
No error. Once the laundry is
distributed evenly, the spin cycle starts
automatically.