Explanation Of Terms And Symbols; Safety; Intended Use - hanseatic HTW610D Gebrauchsanleitung

Explanation of terms and symbols

Please read through the safety
instructions and user manual
carefully before using the appli-
ance. This is the only way you can use all
the functions safely and reliably.
Be sure to also observe the national reg-
ulations in your country, which are valid
in addition to the regulations specified in
this user manual.
Keep all safety notices and instructions
for future reference. Pass all safety notic-
es and instructions on to the subsequent
user of the product.

Safety

Intended use

The appliance is designed for washing, rins-
ing and spinning laundry in normal household
quantities.
It was designed exclusively for use in private
households and is not designed for commer-
cial use or multiple use (e.g. use by several
parties in a block of flats).
The appliance is designed to hold up to a
maximum of 6 kg (model HTW610D)/
5 kg (model HTW510D) of dry textiles.
The appliance is intended only for use with
a water pressure of between 0.1 MPa and
1.0 MPa (1.0 to 10.0 bar).
Explanation of terms and symbols
The following symbols can be found in this
user manual.
WARNING!
This symbol indicates a hazard with a medi-
um level of risk which, if not avoided, could
result in death or serious injury.
CAUTION!
This symbol indicates a hazard with a low lev-
el of risk which, if not avoided, could result in
minor or moderate injury.
NOTICE
This symbol warns against possible damage
to property.
The symbol refers to useful additional
information.
Protective earthing
An ideal ambient temperature of +5 °C to
+40 °C must be maintained for optimal op-
eration.
This appliance is not designed for use as a
built-in appliance.
Persons who are unable to operate the appli-
ance safely due to their physical, sensory or
mental abilities or lack of knowledge must be
supervised during use.
Do not make any technical changes to the
appliance.
Use the appliance only as described in this
user manual. Any other use is deemed im-
proper and may result in damage to property
or even personal injury. The manufacturer
accepts no liability for damage caused by im-
proper use.
Page EN-3