13 Keypad (here: Key 1)
Use this to call up the voicemail function on the PBX (if configured: press for a long
time)
14 R key
- query call (flash)
- insert a dialling pause (press for a long time)
15 Accept key/Hands-free key
Function varies depending on situation: dial displayed number, accept call, switch
between receiver operation and hands-free operation, open the Redial List (press for a
short time), start dialling (press for a long time)
16 Control key/Menu key
Function varies depending on situation: Use this to navigate in menus and input fields
Switching the Handset On/Off
Switching on:
Switching off:
p
Enabling/disabling the Keypad Lock
The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on:
Switching off:
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call.
Caution: When the keypad lock is enabled, you cannot call emergency
phone numbers either.
Dialled Calls
Dialling the Phone Number
1.
Use the
to enter the number.
2.
Press the Accept key
COMfortel M-530 - Instructions V02 08/2019
On the switched-off handset, press the Disconnect key
for a long time.
When the switched-off handset is in an idle state, press the
Disconnect key
Press
for a long time.
Press
for a long time. Use the
PIN (if it is not 0000)
for a short time.
for a long time.
Using the Telephone
to enter the handset
27