Switching The Handset On/Off; Enabling/Disabling The Keypad Lock; Dialled Calls - Auerswald COMfortel M-510 Betriebsanleitung

Using the Telephone

Switching the Handset On/Off

Switching on: On the switched-off handset, press the Disconnect key
a long time.
Switching off: When the switched-off handset is in an idle state, press the
Disconnect key
p

Enabling/Disabling the Keypad Lock

The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on: Press
Switching off: Press
PIN (if it is not 0000)
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call.
Caution: When the keypad lock is enabled, you cannot call emergency
phone numbers either.

Dialled Calls

Dialling the Phone Number
1. Use the to enter the number.
2. Press the Accept key
Dialling a Phone Number with Dial Preparation
1. Press the Accept key
2. Use the to enter the number.
The number is dialled approximately 3.5 seconds after you enter the last
digit.
Dialling from Telephone Book
1. Open one of the telephone books:
28
for a long time.
for a long time.
for a long time. Use the
for a short time.
for a long time.
COMfortel M-510 - Instructions V02 08/2019
to enter the handset
for