Brother E-Derie Bedienungsanleitung Seite 143

u y
t r
<Fixed stitch sewing> <Name label sewing>
Start point/end point
(Automatic thread trimming)
E
E
(Automatic thread timing)
1367M
<Example: Fixed stitch sewing>
Start backtack zigzag width
End backtack zigzag width
I Changing the setting
The memory switches can be used to change the under edge trimmer operation. (Refer to item nos. 94, 95 and 96 on
page 195.)
All manuals and user guides at all-guides.com
1472M
F
E
F
1368M
Number of start
backtack stitches
E= Number of fixed
E= stitches
Number of end
backtack stitches
1526M
ZE-8570,8580
7. USING THE OPERATION PANEL
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES
I Automatic thread trimming function (ZE-8580 only)
• When setting fixed stitch/name label sewing, if the
thread trimming key r is pressed so that the indicator
t illuminates, the thread is trimmed automatically af-
ter the set number of stitches have been sewn when
the treadle is depressed continuously.
(When attaching name labels, the thread is trimmed
after each cycle.)
• When the fixed stitch/name label function is canceled,
the automatic thread trimming function is also can-
celed, and the thread trimming indicator t switches
off.
I Automatic sewing (AUTO) function
• When setting fixed stitch/name label sewing, if the
AUTO key y is pressed so that the AUTO indicator u
illuminates, the number of setting stitches is sewn au-
tomatically simply by depressing the treadle once.
• When the fixed stitch/name label function is canceled,
the AUTO function is also canceled, and the AUTO in-
dicator u switches off.
I Combining fixed stitches/name label sewing with
backtacking
The illustration shows an example of stitch combinations
using backtacking.
Note:
The set number of fixed stitches are sewn and sewing
then stops automatically, regardless of the zigzag stop
position setting.
124