Maintenance And Care; Bike Inspection - ROSE THE BRUCE Bedienungsanleitung

6.

Maintenance and Care

Regular care and maintenance will prolong the life of your new bicycle. You should carry out easy cleaning,
servicing and repair tasks yourself (see "4. Before and after your ride" on page 32).
6.1

Bike inspection

DANGER
Risk of accident due to overdue maintenance and service!
When maintenance and servicing have been neglected, worn components may cause accidents.
• The service works and intervals mentioned in this manual must be observed.
• Service and maintenance works must be carried out by the ROSE service team or a qualified bicycle mechanic.
A bike inspection includes a complete check of all components. Servicing is required after a specific period of time
or after a certain amount of kilometres ridden, whichever comes first.
Components
Task
Entire bike
Check torques of all screws.
For torque values, see "6.4 Torques" on
page 38.
Visual inspection of all components.
Frame
Conduct a visual inspection of the frame
to check for damages such as cracks
and deformities, discoloration, as well
as chafing marks from cable casings or
brake hoses.
Suspension
Visual check for damages, such as
fork
cracks and deformities, as well as
discolourations.
Small service, bearing in mind
manufacturer guidelines!
Full service, bearing in mind manufacturer
guidelines!
Headset
Disassemble the headset, clean, lubricate
and re-assemble it.
Replace bearings that don't run smoothly
or that show signs of corrosion.
Seat post
Disassemble the seatpost, clean the
seat post and the frame's seat tube and
reassemble without using lubrication.
Check the torque. For the saddle clamp
torque, see "6.4 Torques" on page 38.
Handlebar /
Check the torque.
Stem
For torque values, see "6.4 Torques" on
page 38.
36
Monthly / Quarterly /
20 hours 60 hours
X
X
X
X
X
Yearly / Other /
200 hours Notes
X
X
X