Cleaning Instructions - Lansinoh 2in1 Elektrische Doppelmilchpumpe Bedienungsanleitung

Two extra white valves are included . Larger size cushions are separately available for sale . To order
replacement part or larger size breast cushions please call +44 (0) 113 259 1425 or visit lansinoh.co.uk
for details in the UK . You can also contact your country distributor .
Before Each Use...
• Always wash hands thoroughly with soap and water before handling the Breastmilk Expression Set,
the pump body, or other attachments .
• Disassemble the Breastmilk Expression Set to clean . Set aside the tubing as it does not need to be
washed or sterilised .
• Do not operate the pump if liquid or moisture is visible in the tubing, but thoroughly dry it first before
use if there are any signs of moisture .

4. CLEANING INSTRUCTIONS

Unless otherwise instructed by your healthcare provider, follow these sterilisation and cleaning
instructions .
Sterilisation
1 . Prior to using the set for the first time, disassemble and boil for 10 minutes all parts of the
Breastmilk Expression Set that come into contact with breastmilk . The Set includes all parts except
for the pump base, plug, tubing and tubing connector .
• Note: Ensure you use enough water to keep parts afloat while boiling .
• Note: Do not boil the tubing and tubing connector .
2 . Remove all parts from water immediately after boiling .
3 . Completely air dry before assembly and next use .
• Note: Partially dried parts may affect operation of the pump .
Please ensure parts are completely dry before use .
To use steam or microwave sterilisers: Follow the manufacturers instructions . Ensure all openings are
face down in the steriliser . Ensure you wash your hands before removing equipment from the steriliser .
Cleaning
• Set aside the tubing and tubing connector . These items do not need to be washed or sterilised
because the diaphragm prevents them from coming into contact with the breastmilk .
• The breast cushion and containers may be cleaned in the upper compartment of your dishwasher
or hand washed with dish soap in hot water . For best results, we recommend using a baby bottle
brush to clean the container and a teat brush to clean the insides of the breast cushion . DO NOT use
solvents or abrasives .
• Rinse with hot, clean water .
• All other parts of the Breastmilk Expression Set should be hand washed to prevent loss and extend
their usefulness .
• To clean your breast pump, wipe the base with a damp cloth, using
only water or mild soap .
• Do not wash or sterilise the tubing or tubing connector.
• Note: For best results, make sure the diaphragms are completely
dry before use .
• Note: Before using the Breastmilk Expression Set, visually inspect the individual components
for cracks, chips, tears, discoloration or deterioration, as this may affect the functionality of the
Breastmilk Expression Set .
WARNING: It is highly recommended not to use any method other than the above mentioned
cleaning methods.
WARNING: Use caution when cleaning the small white valve. It is important for proper suction. Do
not use excessive force and do not clean with a baby bottle brush or a nipple brush. Gently wash by
hand in hot, soapy water and rinse under hot running water.
Please visit lansinoh.co.uk or call +44 (0) 113 259 1425 in the UK or contact your country distributor
for further guidance and replacement parts .
5. ASSEMBLING THE BREASTMILK EXPRESSION SET
Your Breastmilk Expression Set comes preassembled in Lansinoh
Expression Set parts (except tubing and tubing connector) as described in the "Cleaning Instructions"
section . Once all parts are clean and completely dry, assemble the expression set as follows:
1 . Place purple diaphragm on top of breast cushion body . Then place and twist the diaphragm cap
onto breast cushion body enclosing the purple diaphragm .
2 . Push ComfortFit® breast cushion into breast cushion body .
3 . Gently secure white valve into the bottom of breast cushion body .
Note: Use caution when handling and cleaning the small white valve .
5
product packaging . Clean Breastmilk
®
Diaphragm Cap
Diaphragm
ComfortFit® Breast Cushions
Breast Cushion Body
White Valve
160ml Breastmilk Collection
Container
4 . Screw collection container onto breast cushion body .
5 . Insert tubing into back of diaphragm cap; ensure tight fit .
6 . Insert tubing connector between the sets . Place tubing input into the pump .
6. PUMPING TIPS
The most important part of successful pumping is the ability to trigger the let-down reflex . This is
when your milk begins to flow freely . Warm wet compresses applied to the breasts and gentle, circular
massaging of the breasts prior to and/or during a pumping session can help encourage this natural
reflex . Thinking of or looking at your baby, or a photo of your baby if you are apart, can also be helpful .
You also may wish to try the Lansinoh ® TheraPearl
let-down .
Some mums can achieve more than one let-down during a pumping session . You may be able to
achieve a second or third let-down during your pumping session by returning to the Let Down
(Stimulation) Phase by pressing the Let-Down Button
How Long To Pump
Whilst the Lansinoh 2in1 Electric Breast Pump can be used as a single breast pump, double pumping
®
compared to single pumping will reduce the time you spend expressing your milk . Breastmilk is
produced on a supply and demand basis and by expressing your breastmilk regularly, your body will
be stimulated and you will be able to maintain your milk supply . Just like with breastfeeding, it is not
necessary to time your pumping sessions though you will get a better sense of the time it takes for
your body to express your milk using a breast pump .
If you have any breastfeeding or breast pump related questions, consult with your midwife, health
visitor or other health care professional or visit www .lansinoh . c o .uk
Pumping and Feeding Tips
• You may pump one breast while nursing the baby on the other . This allows you to maximize pumping
effectiveness, using the let-down reflex stimulated by your baby's sucking .
• You may pump into any standard sized screw top bottle or container .
• Should you choose to use the Lansinoh ®
precautions:
• Always test the temperature of any liquid before feeding your baby .
• Do not let a child take a bottle to bed or self feed without supervision .
• To prevent possible choking hazard, test strength of the nipple by pulling on the bulb portion .
Discontinue use if any tear or crack appears .
• You may also want to try the Lansinoh ® bottle, featuring the NaturalWave® teat which is clinically
proven to help babies maintain established breastfeeding patterns allowing your baby to go from
breast to bottle and back again .
7. USING THE LANSINOH 2IN1 ELECTRIC BREAST PUMP
®
The Adjustable Difference
Your Lansinoh 2in1 Electric Breast Pumpallows you to select a pumping style and adjust the suction
®
levels separately to identify the settings that are most comfortable for you . You would use the
Pumping Style Selector Button to select a style . Then adjust the suction levels with the + and -
buttons to the level which is most comfortable for you .
For Single Pumping
Remove one tube and close the tubing connector . Make sure that the plug is placed into the pipe
outlet properly and pushed in securely . Then follow the instructions below from step 2 .
For Double Pumping
® 3in1 Breast Therapy which can help with your milk
.
bottle with a teat of your own, please take the following
1 . Make sure all tubes are attached to the tubing
connector
2 . Hold the Breastmilk Expression Set to your breasts
so that the nipple is aligned to extend straight
toward the nipple tunnel of the breast cushion .
Make sure the breast completely fills the breast
cushion so that a vacuum is formed and no air
escapes . If you experience friction or discomfort on
your nipples, you may need a different size cushion .
Smaller and larger size cushions are also available .
For more details, please call +44 (0) 113 259
1425, visit lansinoh.co.uk or contact your country
distributor . The Breastmilk Expression Set and
nipple tunnel must tilt slightly downward to allow
milk to flow naturally toward the bottle .
3 . Press and hold the On/Off Button for a few seconds
to turn the pump on . Breast Pump will start in the
Let-Down (Stimulation) Phase .