Changing The Led Bulbs - hanseatic SY-6002C-P1-C84-L22-600 Gebrauchsanleitung

Page EN-22 Care and maintenance
(19)
5. Place the new activated charcoal filters on
the left and right side of the motor: Put the
holding lug into the rectangular opening,
place the filter onto the motor, and let the
locks click into place.
6. Place a grease filter with the pins into the
openings on the left side.
7. Slide the lock to the left; snap the grease
filter in and release the lock.
8. Repeat this step for the other grease fil-
ter.
9. Switch the power back on.
10. Dispose of the used charcoal filter with
household waste.
(20)

Changing the LED bulbs

WARNING
Risk of injury!
■ Should one of the LEDs stop working,
it must be changed by an authorised
service technician.
The light source is exchangeable and may
only be exchanged by an authorized special-
ist! Note for the service technician:
This exhaust hood requires LEDs with the
ILCOS D-Code
DBR-2/65-H-64, AC 110–240 V, max. 2 W.