Inserting/Replacing Activated Charcoal Filters - hanseatic SY-6002C-P1-C84-L22-600 Gebrauchsanleitung

3. Open the lock (18) on the grease fil-
ters (17), and carefully pull the grease fil-
ters (17) downwards to remove them.
4. Wash the grease filters (17) in a dishwash-
er or in the sink like ordinary dishware.
5. Place a grease filter with the pins into the
openings on the left side.
6. Slide the lock to the left; snap the grease
filter in and release the lock.
7. Repeat this step for the other grease filter.
8. Switch the power back on.
Inserting/replacing activated
charcoal filters
The activated coal filters remove odours. They
have to be replaced as soon as the cooking
odours can no longer be adequately filtered. If
used frequently, the filters should be renewed
regularly or at least checked every 6 months.
For the source of supply, please see chapter
"Safety" on page EN-4.
1. Remove the mains plug from the socket,
or switch off the mains supply using the
corresponding circuit breaker.
Care and maintenance
2. Pull the flat panel (14) forwards.
(18)
(17)
(17)
3. Open the lock (18) on the grease fil-
ters (17), and carefully pull the grease fil-
ters (17) downwards to remove them.
4. Only when replacing the charcoal filters:
The two activated charcoal filters (19) are
located to the right and left of the motor
(20).
Push on the filters and turn them anti-
clockwise.
(19) (20)
Page EN-21
(14)
(19)