Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Before getting started
• Read chapter "Safety" on page EN-4 and
all the safety notices.
• Install the exhaust hood as described in
chapter "Assembly" on page EN-12.
(16)
(17)
(18)
(19)
1200
Switching the appliance on
and off
• To switch the appliance on, touch the sen-
sor (16)
. An audible signal will sound;
the colour on the display will change to
blue.
• To switch the appliance off, touch the
sensor (16)
again. An audible signal
will sound; the colour on the display will
change to white.
Setting the time
When the appliance is first connected to the
0000
mains, the time displayed is
1. Switch on the appliance as described in
2. Touch and hold the sensor (17)
3. Use the sensors (20)
4. Touch the sensor (17)
5. Use the sensor (20)
(20)
(21)
(22)
6. Touch the sensor (17)
Switching on the fan
The fan has three settings: (20)
medium and (22)
• To switch the fan on, touch the sensor for
Changing the fan setting
• To change the fan setting, touch the sen-
Operation
To change Central European Time
(CET) to daylight savings time, you
need to manually set the clock forward
at the end of March and back again at
the end of October.
the chapter "Switching the appliance on
and off" on page EN-17.
about three seconds. An audible signal will
12
sound; the display
will start to flash.
the hour.
signal will sound; the display
to flash.
to set the minutes.
(16)
again to finish setting the time.
high.
the desired setting. An audible signal
will sound; the colour on the display will
change to blue.
sor for the (other) desired setting. An au-
dible signal will sound; the colour on the
display will change to blue.
Page EN-17
12:00
.
for
and (21)
to set
again. An audible
00
will start
or the sensor
low, (21)
Werbung
Inhaltsverzeichnis
