Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-10
Cleaning, care and maintenance
grease filter upwards to close it, and re-
lease the lock again.
5. Reconnect the mains supply.
Installing/replacing the
activated charcoal filter (only
for circulation air operation)
The coal filters remove odours.
They have to be replaced as soon as the
cooking odours can no longer be adequately
filtered. If used frequently, the filters should
be changed regularly (check approx. every
6 months).
1. Unplug the mains plug or switch off the
power to the corresponding main fuse.
2. Push the locking mechanism of the
grease filter
17
to the back and careful-
ly remove the grease filter by pulling it
downwards.
20
19
18
3. Rotate the locking mechanisms 20 of the
old coal filter
18
and remove the filter.
You can dispose of it with the household
waste.
4. Insert the new carbon filter
the recess
towards the cable
hood's interior.
5. Turn the locking mechanisms
carbon filter in front of the filter.
6. Insert the grease filter
back end in the recess below in the ex-
haust hood. Slide the lock backwards,
hinge the grease filter upwards to close it,
and release the lock again.
7. Reconnect the power supply.
Changing the LED
17
If one of the LEDs ceases to work, it must
be changed by an authorised service tech-
nician. Contact our service team as required
(see page
EN-18).
21
20
18
so that
19
on the carbon filter points
21
exiting the exhaust
20
of the
17
by placing the
17
Werbung
Kapitel
Inhaltsverzeichnis
