5. Place the new charcoal filters to the right
and left of the motor and tighten them in
an anti-clockwise direction. Allow the lock
to click into place.
6. Place the grease filters (9) with the pins
into the openings (15).
7. Slide the lock back, press the grease fil-
ter (9) on top and release the lock. The
grease filter engages.
Care and maintenance
(17)
8. Fold the cover (7) down.
(16)
9. Switch the power back on.
10. Dispose of the used charcoal filters with
household waste.
Changing the lighting
CAUTION
Risk of injury!
■ If one of the LEDs ceases to work, it
(9)
must be changed by an authorised
service technician.
Note for the service technician: This
exhaust hood requires LEDs with the
ILCOS D-Code
DBR-2/65-H-64 110–240 V~, 2 W.
(15)
(
Page EN-19
(7)