(13)
(11)
Assembly: final steps
1. If you would like to use the exhaust mode
with the exhaust hood, insert the activated
charcoal filters.
– You can find the order number in chapter
"Safety" on page EN-4.
– To attach, see "Inserting/replacing acti-
vated charcoal filters" on page EN-21
Assembly C: Attaching to a recessed hanging cabinet
3. Adjust the exhaust hood so that it is cen-
tred within the recess and then tighten the
six screws (13).
The exhaust hood is now mounted.
2. Connect the mains plug to a properly in-
stalled socket.
The exhaust hood is now ready to use.
Page EN-17