Tools And Aids; Before Getting Started; Mounting The Plastic Holder - hanseatic SY-6002C-P1-C84-L22-600 Gebrauchsanleitung

Tools and aids

You will need:
– screwdriver
– for wall mounting, a drill with a stone bit
– measuring tape / ruler
– spirit level and pencil
– stable stepladder
– work gloves
– another person to help

Before getting started

• Read chapter "Safety" on page EN-4 and
all the safety notices.
Assembly: First steps

Mounting the plastic holder

(2)
Regardless of whether the exhaust hood is to
be mounted on a wall or in a hanging cabinet,
the plastic holder and check valve must be
mounted.
1. Place the plastic holder (2) on the top of
the exhaust hood.
2. Affix it using the two screws (4).
Page EN-11
(4)