Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-20
Care and maintenance
3. Only when replacing: Release the activa-
ted charcoal filter (23) by pushing down
the two locks (24) and remove it.
(24)
(23)
2 ( (
( 5
( ( 2
(25)
( ( 5
(26)
4. Place the newly activated charcoal filter
(23) with the pins (25) into the openings
(26) at the bottom of the engine compart-
ment frame (27) as shown. Allow the locks
(24) to snap into place.
(19)
(20)
(21)
(22)
5. Place a grease filter (20) with the pins (21)
into the openings (22).
6. Push the lock (19) down; snap the grease
filter (20) shut and release the lock (19)
again.
7. Close the cover (18) again.
8. Switch the power back on.
9. Dispose of the used charcoal filter with
household waste.
Changing the lighting
WARNING
Risk of injury!
■ If one of the LEDs ceases to work, it
must be changed by an authorised
service technician. Note for the ser-
vice technician: This exhaust hood
requires LEDs with the ILCOS D-Code
DSL-4-S-350, DC 12 V, 4 W.
(27)
Werbung
Kapitel
Inhaltsverzeichnis
