Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(13)
(14)
1. Place a grease filter (13) with the pins
into the openings.
2. Push the lock (14) down; snap the grease
filter (13) shut and release the lock again.
3. Repeat the last two steps for the second
grease filter.
4. Switch the power back on.
5. Dispose of the used charcoal filters with
household waste.
Care and maintenance
Changing the lighting
WARNING
Risk of injury!
■ Should one of the LEDs stop working,
it must be changed by an authorised
service technician.
The light source is exchangeable and may
only be exchanged by an authorized speci-
alist!
Note for the service technician: This exhaust
hood requires LEDs with the ILCOS D-Code
DBS-2.5/65-H-120/33, 220-240 V~, 2,5 W.
Page EN-19
Werbung
Inhaltsverzeichnis
