Assembly B: Mounting Beneath A Hanging Cabinet; Materials Required For Assembly; A Suitable Hanging Cabinet; Preparing The Hanging Cabinet - hanseatic SY-6002C-P1-C84-L22-600 Gebrauchsanleitung

Page EN-14

Assembly B: Mounting beneath a hanging cabinet

Assembly B: Mounting beneath a hanging cabinet

Materials required for assembly

(1) Exhaust hood, 1×
(7) Retaining plate, long, 1×
(8) Flat washer, 6×
(9) Screw 4.0 × 35.0 mm, 6×
(10) Screw 3.0 × 12.0 mm, 2×

A suitable hanging cabinet

(c)
(b)
The cabinet element must meet the following
requirements:
– Minimum distance between cook-
er and lower edge of exhaust hood (1):
650-750 mm.
– The hanging cabinet must hang exactly
above the hob.
– Min. hanging cabinet dimensions:
– (a) 600 mm in width
– (b) 280 mm in depth
– (c) 176 mm in height
(1)

Preparing the hanging cabinet

(7)
(8)
(9)
(10)
1. Cut an air outlet (d) of at least Ø 16.0 cm.
60
194
(a)
Measurements in mm
2. Cut a rectangular opening (e) of
210 × 210 mm. Observe the lateral dis-
tances shown in the illustration above.
(d)
(e)
516
(e)
210
55
210
67
50