Safety Warnings - Makita EY403MP Betriebsanleitung

Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read instruction manual.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
Maximum permissible cut length
Direction of chain travel
Chain oil tank
Hot surfaces - Burns to fingers or hands.
Intended use
This attachment is designed only for the purpose of prun-
ing branches and limbs in conjunction with an approved
power unit. Never use the attachment for the other pur-
poses. Abusing the attachment may cause serious injury.
About this instruction manual
The term "tool" in this instruction manual refers to the
combination of the attachment and the power unit.
The term "motor" in this instruction manual refers to
electric or engine motor of the power unit.
EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Pole Saw Attachment. Designation of
Type(s): EY403MP.
Fulfills all the relevant provisions of 2006/42/EC and
are manufactured in accordance with the following
Harmonised Standards: EN ISO 11680-1:2011.
Place and date of declaration: Kortenberg, Belgium.
01. 12. 2020
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Declaration of Conformity (For UK)
For UK only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Pole Saw Attachment. Designation of
Type(s): EY403MP.
Fulfills all the relevant provisions of S.I. 2008/1597
(as amended) and are manufactured in accordance
with the following Designated Standards: EN ISO
11680-1:2011.
Place and date of declaration: Kortenberg, Belgium.
01. 12. 2020
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Importer: Makita (UK) Limited, Michigan Drive,
Tongwell, Milton Keynes, Buckinghamshire, MK15
8JD, UK

SAFETY WARNINGS

Pole Saw Safety Warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this machine as well as the instruction man-
ual of the power unit before using. Failure to follow
all instructions listed below may result in electric
shock, fire, and/or serious injury to the operator and/
or bystanders.
Save all warnings and instruc-
tions for future reference.
General precautions
Before starting the tool, read this instruction
1.
manual to become familiar with the handling of
the tool.
Do not lend the tool to a person with insuffi-
2.
cient experience or knowledge regarding han-
dling of the tool.
When lending the tool, always attach this
3.
instruction manual.
4. Do not allow children or young persons under
18 years old to use the tool. Keep them away
from the tool.
5. Handle the tool with the utmost care and attention.
6. Never use the tool after consuming alcohol or
drugs, or if feeling tired or ill.
7. Never attempt to modify the tool.
Do not use the tool in bad weather conditions,
8.
especially when there is a risk of lightning.
This decreases the risk of being struck by
lightning.
8 ENGLISH