Safety Warnings; Additional Safety Instructions - Makita DUP180 Betriebsanleitung

NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-4-5:
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Declarations of Conformity
For European countries only
The Declarations of conformity are included in Annex A
to this instruction manual.
2
or less
2

SAFETY WARNINGS

General power tool safety warnings
WARNING Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Pruning shears safety warnings
1. Do not use the pruning shears in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck
by lightning.
2. Keep all power cords and cables away from
cutting area. Power cords or cables may be
hidden and can be accidentally cut by the blade.
3. Hold the pruning shears by insulated gripping
surfaces only, because the blade may contact
hidden wiring or its own cord. Blades contacting
a "live" wire may make exposed metal parts of the
pruning shear "live" and could give the operator an
electric shock.
Keep all parts of the body away from the blade.
4.
Do not remove cut material or hold material to
be cut when blades are moving.
When clearing jammed material or servicing
5.
the pruning shears, make sure the power
switch is off and the battery cartridge is
removed. Unexpected actuation of the pruning
shears while clearing jammed material or servic-
ing may result in serious personal injury.
6. Carry the pruning shears by the handle with
the blade stopped and taking care not to oper-
ate the power switch. Proper carrying of the
pruning shears will decrease the risk of inadver-
tent starting and resultant personal injury from the
blades.

Additional Safety Instructions

Use personal protective equipment. Always
1.
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
2. This tool is for pruning branches. Do not use it
for any job except that for which it is intended.
3. Never allow children, persons with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge or people
unfamiliar with these instructions to use the
tool. Local regulations may restrict the age of
the operator.
4. Children should be supervised to ensure that
they do not play with the appliance.
9 ENGLISH