Display - Miele PTD 901 Originalbetriebsanleitung

| |
English 3 Machine description
Automatic hood start
Closing the hood automatically starts a washing programme. The automatic hood start can be deactivated by an authorised service
technician (P572). Every washing programme will then need to be started by pressing the start button.
PTD 901 LIFT (version) – automatic hood
The hood opens automatically after every washing programme and can be closed again using the start button on the front cover.
PTD 901 ECO (version)
Note: Cold water connection required.
In the ECO module there is a fan motor and heat exchanger above the warewasher. The fan motor extracts warm humid air (= va-
pours) from the wash chamber and transfers the energy gained to the cold inlet water via the heat exchanger. A waste water heat ex-
changer provides an additional energy gain.
Integral water softener (optional)
Warewasher with built-in salt container for regeneration salt. The regeneration salt softens the inlet water and thus prevents a build-up
of limescale inside the warewasher and on the items being washed.
3.3

Display

Operating the display is similar to operating the display of a smartphone. The display responds to light touches. Therefore, operate the
display only with your fingers and do not use any sharp objects. You can also operate the display and start button with wet hands or
rubber gloves.
Item Name
1 Washing programmes
2 Selection of additional and special programmes
3 Display area for error pictograms
4 Start button
Screen saver
The display is dimmed if it is not used for a long time. Washing can also be carried out when the display is darkened.
Start button (4)
Colour
Not lit
Orange
White
Flashing white
Orange
Flashing orange
Flashing white/orange
Red
60
Meaning
Warewasher is switched off.
Warewasher is filling and heating up.
Warewasher is ready for use.
Washing programme is ended; hood has not been opened yet.
Warewasher is washing.
Soaking programme is running.
Only for warewashers with automatic hood mechanism:
The hood moves down, a washing programme then starts automatically.
Only for warewashers with ECO module:
Warm, humid air is being extracted. The washing programme is completely finished only when
the start button flashes white.
The warewasher no longer washes because there is a serious error.
|
12020302; 2021-09
1 2
|
3 4
Operating instructions PTD 901