Laborota 20 Control Automatic, Specifications - Heidolph LABOROTA 20 control automatic Betriebsanleitung

LABOROTA 20 CONTROL AUTOMATIC, SPECIFICATIONS

Supply voltage
Power rating
Rotation speed (electronic control)
Heating bath
Level control, water bath
Temperature range, water bath
Temperature range, oil bath
Heating power
Bath lift
Over temperature & dry
running protection
Boil temp. sensor: display range
Evaporator flask
Aeration valve, vacuum valve and
vacuum sensor
Timer operation
suction gauge
pumping capacity, vacuum pump
Cooling water consumption
Dimensions ( width x depth x height )
Weight
Permissible environment conditions
All manuals and user guides at all-guides.com
3 x 400 V 50/60 Hz or 3 x 230 V 50/ 60 Hz
1 x 230V 50/60 Hz
4600 VA
6 - 160 1/min
400 mm dia., V2A, 17 liters capacity, when using a
20 liter evaporating flask
float switch plus automatic refill valve
20 - 100 ° C
20 - 180 ° C
4000 watts
motorized
separate safety circuit
0 - 150°C
20 liters;
standard
0 – 99:59 h
1 - 1200 mbar
3.0 m
150 - 350 l / h
970 mm x 620 mm x 1600 mm
(with front panel protrusion: 690 mm)
135 kg approx. (does not include glassware kit and
vacuum pump), vacuum pump: 14 kg.
glassware kit: 40 kg
0-40°C with 80% relative air humidit
71
10 liters optional
3
/h
E