FP FPi 600 Betriebsanleitung Seite 25

6.3.3 Envelope feeding problems
Symptom
Envelopes are
double fed.
Envelope stops
skewed.
Envelopes are fed
irregularly.
Flap is wrinkled
and sometimes
not opened.
6.3.4 Document feeding problems
Symptom
No document fed. Feeder empty.
Skewed
documents fed.
Shifted
documents in
feeder trays.
24
Possible cause
Envelopes not placed
properly in the
hopper.
Side guides of the
envelope hopper are
set too wide.
Hopper almost
empty.
Side guides set too
narrow.
Envelope not within
specifications.
Flap sticks.
Flap curled.
Possible cause
Side guides set too
narrow.
Feeder trays are not
locked.
Side guides set too
wide.
Feeder trays are not
locked.
Side guides set too
narrow.
Feeder trays are not
locked.
Dirty feeder rollers.
Remedy
Check and replace if
needed.
Check side guides
and adjust if needed.
Refill hopper.
Check side guides
and adjust if needed.
Check specifications
and change
envelopes if needed.
Store envelopes
according to
specifications.
Envelopes stored or
manufactured
improperly.
Remedy
Refill feeder.
Adjust the side
guides.
Push the lever to lock
the feeder.
Adjust side guides.
Push the lever to lock
the feeder.
Adjust the side
guides.
Push the lever to lock
the feeder.
Clean the feeder
rollers.
Reference
"Loading Envelopes" on
page 14
"Loading Envelopes" on
page 14
"Loading Envelopes" on
page 14
"Loading Envelopes" on
page 14
"Envelope and Insert
Specifications" on
page 28
"Envelope and Insert
Specifications" on
page 28
"Envelope and Insert
Specifications" on
page 28
Reference
"Loading the Document
Feeder Tray" on page 13
"Adjusting the Side
Guides of the Document
Feeder" on page 13
"Loading Documents" on
page 12
"Adjusting the Side
Guides of the Document
Feeder" on page 13
"Loading Documents" on
page 12
"Adjusting the Side
Guides of the Document
Feeder" on page 13
"Loading Documents" on
page 12