Supervisor Menu - FP FPi 600 Betriebsanleitung

2.4.4 Menu
When you press the Menu button a selection
menu appears. This menu allows you to change
system settings and define jobs. The screen
shows the following functions:
• Language settings: change the language of
the user interface.
• Supervisor menu: define envelope settings
(see "Supervisor Menu" on page 10, only for
authorized personnel).
2.4.5

Supervisor Menu

When you press the Supervisor menu button in the selection menu, a login menu opens.
Enter the PIN-code 2546 to access the 'supervisor menu'.
When you enter the correct pin code the
'supervisor menu' appears. This menu enables
you to:
• Define custom envelope sizes (press the
Adjust stop position button).
• Adjust the envelope stop position (see
"Envelope Position" on page 26).
• Adjust the sealing position (see "Sealing
position" on page 26).
• Switch off popups, like the popup that tells
you to press the 1x button.
2.4.6 Job Settings Menu
When you press on a job and press the edit button
, the 'job settings' menu opens. This menu
enables you to:
• Edit a job (see 4.2 "Edit a Job" on page 18).
• Delete a job (see 4.3 "Delete a Job" on page
18).
• Reset the job counter: sets counter to zero.
• Switch the double feed control (DFC) on or
off, per feeder. For example, if you have a
document with an address sticker on it,
switch the DFC off. The DFC sees the sticker as a double feed and generates an error
message.
10