Introduction; Intended Purpose - Parkside PTKS 2000 G5 Originalbetriebsanleitung

GB IE
Content
Introduction .......................................................... 20
Intended purpose .................................................. 20
General description ............................................... 21
Extent of the delivery ......................................................21
Overview ......................................................................21
Functional description .....................................................21
Technical data ....................................................... 21
Safety instructions ................................................. 22
Symbols and icons .........................................................22
General safety instructions for power tools ........................22
Safety information for circular table saws ..........................23
Safety Instructions for Handling the Laser ..........................25
Safety Instructions for Handling Batteries ...........................25
Residual Risks ................................................................25
Electrical Connection ......................................................25
Important Instructions ......................................................26
Faulty Electrical Connection Cable ...................................26
Alternating Current Motor ...............................................26
Assembly .............................................................. 26
Assembly, Replacement of Parts and Adjustments ...............26
Assembling the frame and table width extender .................26
Replacing the Table Insert ................................................27
Attaching/changing the saw blade ..................................27
Mount/adjust the riving knife; insert the battery .................27
Mounting / dismounting the saw blade guard ...................27
Connect the suction device ..............................................28
Before putting into operation ...........................................28
Operation ............................................................. 28
Switching on and off ......................................................28
Changing the speed .......................................................28
Adjusting the Cutting Depth .............................................28

Introduction

Congratulations on the purchase of your new device. With it, you
have chosen a high quality product.
During production, this equipment has been checked for quality
and subjected to a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute part of this product.
They contain important information on safety, use and dis-
posal.
Before using the product, familiarise yourself with all of the oper-
ating and safety instructions. Use the product only as described
and for the applications specified. Keep this manual safely and in
the event that the product is passed on, hand over all documents
to the third party.

Intended purpose

The table circular saw is used for cutting all types of wood length-
wise and crosswise (only with the transverse stop), depending on
the machine size. All types of round timbers must not be cut with
it. The machine may be used only for its prescribed purpose.
Any other use beyond that is considered to be not in accordance
with the designated purpose. The user/operator is liable for all
types of resulting damage or injury and not the manufacturer.
The only saw blades which may be used are those which are suit-
able for the machine (HM or CV saw blades).
The use of any type of HSS saw blades and cutting discs is
prohibited. Use in accordance with the designated purpose is
20
Working with the Parallel Stop ............................. 28
Adjusting the cutting width ..............................................28
Adjusting the stop length .................................................28
Adjusting the rip fence ....................................................28
Adjusting the scale of the parallel stop ..............................28
Transverse stop ..............................................................28
Angle Adjustment ...........................................................29
Using the Laser ..............................................................29
Adjusting the Laser .........................................................29
Use ....................................................................... 29
Working Instructions .......................................................29
Performing Longitudinal Cuts ...........................................29
Cutting narrow Workpieces .............................................29
Cutting very narrow Workpieces ......................................29
Performing Bevel Cuts .....................................................30
Performing Transverse Cuts ..............................................30
Cutting Chipboard .........................................................30
Transport .......................................................................30
Cleaning and Servicing.......................................... 30
Cleaning .......................................................................30
General maintenance work .............................................30
Storage ................................................................. 30
Waste disposal and environmental protection ....... 30
Spare parts/Accessories ........................................ 31
Guarantee ............................................................ 31
Repair Service ....................................................... 31
Service-Center ....................................................... 32
Importer ............................................................... 32
Trouble shooting ................................................... 32
Translation of the original
EC declaration of conformity ............................... 130
also deemed to include observance of the safety instructions, as
well as the assembly and operating instructions in the operating
manual.Individuals who operate and maintain the machine must
be familiar with it and must have been instructed in possible haz-
ards. Moreover, the latest accident prevention regulations must be
strictly observed. Other general rules in the fields of occupational
health and safety technology must be complied with.
Caution! When using equipment, certain safety precautions
must be complied with in order to avoid injuries and damage.
You should therefore read these operating instructions / safety
instructions carefully. Keep these in a safe place so that the infor-
mation is available to you at all times. Should you give the device
to anyone else, please give them these operating instructions /
safety instructions as well. We assume no liability for accidents
or damage caused by failure to observe these instructions or
the safety instructions. Changes to the machine will cause the
manufacturer's liability with respect to any resulting damage to
be completely excluded. Even when the device is used in accord-
ance with the designated purpose, it is nevertheless not possible
to completely eliminate certain residual risk factors. Due to the de-
sign and structure of the machine, the following risks may occur:
• Touching the saw blade in the area of the saw which is not
covered;
• Reaching into the running saw blade (cuts)
• Kickback of workpieces and workpiece parts.
• Saw blade breaks.
• Ejection of faulty hard metal parts of the saw blade.
• Hearing damage if the necessary hearing protection is not
used.