Introduction; Proper Use; Features And Equipment - Parkside PHKS 1450 LASER Bedienungs- Und Sicherheitshinweise

Introduction

The following pictogrammes / symbols are used in these operating instructions:
Read the operating instructions!
Always heed warning labels and
safety instructions!
Caution - Danger of electric shock! Hazardous
voltage – danger to life!
Caution, laser! Do not expose yourself to laser
radiation.
Explosive material!
V ~
Volt (AC)
n
Rated idle running speed
0
Dispose packaging and appliance in an
environmentally-friendly way!
Circular saw PHKS 1450 LASER
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical
power tools correctly. To help you do this please
read the accompanying operating instructions.
Keep these instructions in a safe place. If you pass
the device on to anyone else, please ensure that
you also pass on all the documentation.

Proper use

Q
For sawing longitudinal, cross and mitre cuts in
6 GB
W
Watts (effective power)
Protection category II power tool;
double insulated
Wear hearing protection, dust protection mask,
protective glasses and protective gloves.
Keep children and other unauthorised personnel
at a safe distance when using electrical tools.
Keep the device away from rain or moisture.
Water entering an electrical device increases the
risk of electric shock.
Damaged appliances, power cables and power
plugs mean potentially fatal risks from electric shock.
Regularly check the condition of the appliance,
the power cables and the power plugs.
Proper procedure and handling.
firmly supported solid wood, plywood, plastic and
lightweight construction materials. Please note that
the blade pre-installed in the saw as supplied is
intended for use with wood only. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
dangers. Not suitable for commercial use.

Features and equipment

Q
Rotation speed setting wheel
1
Safety lock-out
2
Spindle lock
3
Cutting angle setting clamp
4
Cutting depth setting clamp
5
Automatic blade guard
6
Base plate
7
ON / OFF switch
8
Sawdust removal connector
9