Introduction; Proper Use; Features; Package Contents - Parkside PHKS 1350 C2 Originalbetriebsanleitung

CIRCULAR SAW PHKS 1350 C2

Introduction

Congratulations on the purchase of your new
appliance. You have selected a high-quality
product. The operating instructions are part of this
product. They contain important information about
safety, use and disposal. Before using the product,
familiarise yourself with all operating and safety
instructions. Use this product only as described and
only for the specified areas of application. Please
also pass these operating instructions on to any
future owner(s).

Proper use

This circular saw (hereinafter "appliance") is
designed for longitudinal, cross and mitre cuts in
firmly supported solid wood, chipboard, plastics
and lightweight construction materials. Any other
uses of or modifications to the device are deemed
to be improper usage and may result in serious
physical injury. Not for commercial use.

Features

Safety lock-out
ON/OFF switch
Cutting depth scale
Allen key SW 6
Locking screw
Base plate
Guide fence slot
Wing screw for guide fence slot
Wing screw for cutting angle preselector
Cutting angle scale
Spindle lock
Auxiliary handle
ON/OFF switch laser
Laser discharge opening
│ GB │ MT
■ 44
Guide fence
Clamping flange
Clamping screw/plain washer
Blade guard
Release lever for the blade guard
Saw blade
Chip ejector
Vacuum adapter for dust extraction
Rotational speed preselector adjusting wheel
Battery compartment cover

Package contents

1 circular saw
1 guide fence
1 vacuum adapter for dust extraction
1 Allen key SW 6
2 saw blades
2 batteries (Best before date 15/06/2023)
1 operating instructions

Technical details

Nominal power input
Rated voltage
Idle speed
Saw blades
190mm
Max. cutting depth
max. 5 6 mm
Protection class
1350 W
230 V ∼, 50 Hz
(Alternating current)
n 2.200 – 4.700 rpm
0
1x Ø 190 mm x 2.5 mm
x Ø 20 mm, 24 teeth
1x Ø 190 mm x 2.5 mm
x Ø 20 mm, 48 teeth
at 0°
wood/plastic 65 mm
at 45°
wood/plastic 44 mm
II / (Double shielded)
PHKS 1350 C2