Installation; Important User Information; Requirements; Preparing Food - hanseatic MC-IF7021B2 Gebrauchsanleitung

Page EN-22

Installation

Installation

Important user information

The glass ceramic hob is intended to be fitted
in a kitchen worktop or the like. If you have
the requisite skills, you can fit the hob your-
self. However, the electrical connection must
be carried out by authorised specialist staff.

Requirements

To ensure proper operation, the following re-
quirements must be met:
– The appliance complies with heat protec-
tion class 'Y' (EC 335-2-6), which means
that only one side of the appliance is al-
lowed to be next to taller kitchen units or
walls. The built-in furniture must have cov-
erings and the adhesives used must be
heat-resistant (100 °C). If this is not the
case, this can lead to deformation or de-
tachment of the covering surface. If you
do not know the thermal resistance of your
kitchen furniture, leave a gap of approxi-
mately 2 cm between the furniture and the
cooker.
– The distance between the appliance and
the extractor hood must be at least 760
mm.
– Always install extractor hoods in accord-
ance with their user manuals.
– Do not place the cooker directly next to a
refrigerator or freezer. This will increase its
energy consumption unnecessarily due to
heat emission.
– You must leave at least 50 mm of free
space below the recess for ventilation pur-
poses. No heat-sensitive items (cabinets,
drawers etc.) should be found in this area.
Any side walls or drawers which are pres-
ent must be sawn out or dismantled ac-
cordingly.

Preparing food

To ensure proper operation, the following re-
quirements must be met:
– The worktop must be at least 30 mm thick
and at least 590 mm deep, must be hori-
zontal and level and must be sealed on the
wall side against overflowing liquids.
– The appliance must be surrounded by at
least 50 mm of worktop on all sides.
min. 760 mm
min. 50 mm
min. 20 mm
If the appliance is separated from the rest of
the mounting cupboard using a horizontal fix-
ing plate, the space between the base of the
appliance and the fixing plate must be at least
50 mm high.
– If the appliance is separated from the rest
of the mounting cupboard using a vertical
fixing plate, the space between the wall
and the fixing plate must measure at least
20 mm.
Air outlet
min. 5 mm