Herunterladen Inhalt Inhalt Diese Seite drucken

John Bean BFH 2000 Betriebsanleitung Seite 85

Inhaltsverzeichnis

Werbung

Руководство по эксплуатации
Ручной выбор режима ALU
7.3.2
• Нажмите клавишу меню F2 (Рис. 7-14) в окне
БАЛАНСИРОВКИ или ВВОДА ДАННЫХ ДИСКА
(Рис. 7-10).
• Выберите тип ALU в соответствии с необходимой
схемой установки грузов.
Рис. 7-14 Типы ALU
Опции меню F2:
1 ALU 0 (стандартный) – Пружинные грузики
устанавливаются на внешней и внутренней
сторонах обода.
ALU 1 - Клеевые грузики устанавливаются на
2
плечах обода.
ALU 2 - Клеевые грузики устанавливаются на
3
внутренней стороне обода и на диске в местах,
невидимых снаружи.
4 ALU 3 - Пружинный грузик устанавливается на левой
закраине обода, а клеевой – скрытно внутри обода,
чтобы они не были заметны снаружи.
ALU 4 - Пружинный грузик устанавливается на
5
левой закраине обода, клеевой - на правом
плече обода.
ALU 5 - Пружинный грузик на правой закраине
6
обода, клеевой - на левом плече обода.
Выбранный тип ALU отображается в виде значка
(Рис. 7-13) в верхнем левом углу окна, в поле
состояния.
BFH 2000
All manuals and user guides at all-guides.com
Operation - MANUAL
7.3.2
Manual ALU selection
On the BALANCING and ENTERING RIM DATA screen
(Fig. 7-10) press the F2 MENU key (Fig. 7-14) to
select a specific ALU mode.
Select the ALU item corresponding to the required
weight location.
Figure 7-14 ALU types
Assigned F2 Menu items:
1 ALU 0 (normal) - Using clip-on weights on the internal
and external sides of the rim.
2 ALU 1 - Using adhesive weights on the internal and
external rim flange.
3 ALU 2 - Using an adhesive weight on the internal rim
flange and an adhesive weight on the rim disc. Both
weights will be invisible from the outer wheel.
4 ALU 3 - Using a clip-on weight on the inside and an
adhesive weight on the rim disc. Both weights will be
invisible from the outer wheel.
5 ALU 4 - Using a clip-on weight on the inside and an
adhesive weight on the external rim flange.
6 ALU 5 - Using an adhesive weight on the internal rim
flange and a clip-on weight on the outside of the rim.
A Type of ALU in use identification icon Fig. 7-13 will be
displayed in the Status Bar at top left.
85

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis