Установка грузов за спицами
8.4.2 Установка балансировочных грузов
Установка клеевых грузов на левой
стороне диска
•
Очистите места установки грузов.
•
Установите
клеевые
указаниям раздела 8.2.2.
Установка скрытых клеевых грузов
Расчетные веса балансировочных грузов и
указатели положения их установки за обеими
спицами представлены на окне справа (Рис. 8-21).
Поверните колесо в положение корректировки
•
баланса
(зеленые
указателей справа)
заблокируйте колесо педалью тормоза.
•
Очистите место установки груза.
•
Установите балансировочный груз (в данном
примере 55 г., A, Рис. 8-22) в указанном месте.
•
Поверните
колесо
корректировки баланса и заблокируйте его
педалью тормоза.
•
Очистив необходимое место, установите груз
соответствующего веса за второй спицей (в
данном примере, 75 г., B, Рис. 8-22).
Примечание:
Порядок очередности установки разбитых на
части грузов не предусмотрен. Оператор может
самостоятельно решить, какой груз устанавливать
первым.
BFH 2000
All manuals and user guides at all-guides.com
грузики,
следуя
стрелки
на
одном
Рис.
(A,
8-22)
в
другое
положение
Behind-the-spokes placement
8.4.2
Weights placement
How to fit adhesive weights on the left side of
the rim disc
•
Clean the fitting position before attaching the
adhesive weights.
•
Fit adhesive weights on the left side of the rim disc
as described in § 8.2.2.
Applying hidden adhesive weights
The measured values and the positioning arrows for the
two correction positions behind the spokes (Figure 8-
21) are given on the right of the Indications Field.
•
Turn the wheel to move one of the split imbalances,
on the right side ( A,Figure 8-22) into the
из
compensation position (green arrows), then lock the
и
wheel with the brake pedal.
•
Clean the application point before attaching the
adhesive weight.
•
Apply the balance weight (in the example 55 grams,
A,Figure 8-22) at the point indicated.
•
Turn the wheel to reach the remaining split right
side weights compensation position, then lock the
wheel with the brake pedal.
•
Having cleaned the area affected, apply behind the
second spoke the weight of the value indicated (in
the example 75 grams, B,Figure 8-22).
Note:
Applying split weights does not involve priorities.The
operator can choose which to apply first.
199